Skip to content
Foster FHS4M4B-103, 1/2" Snap-Tite H Interchange Coupler x 1/2" Male NPT, FH Series, EPDM Seal, Brass

Foster 25HP, 1/4" Straight-Thru Plug x 1/4" Hose ID, FST Series, Steel

by Foster
Save 20% Save 20%
$ 8.89
$ 8.89 - $ 8.89
$ 8.89
$ 7.09
$ 7.09 - $ 7.09
$ 7.09

Maximum-flow connections for air, fluid, and vacuum lines. The Foster 25HP is a steel 1/4" plug from the FST Straight-Thru Series - with NO valve in either half, so the coupling flows as freely as the pipe itself. Standard industrial interchange, rated to 5500 PSI.

Specifications

  • Brand: Foster
  • Series: FST (Straight-Thru, Industrial Interchange)
  • Part Number: 25HP
  • Interchange: 1/4" Standard Industrial
  • Body: 1/4" Plug
  • Thread: 1/4" Hose ID
  • Type: Straight-Thru - NO valve in socket or plug (full flow)
  • Operation: Manual sleeve (retract to connect and disconnect)
  • Flow: Inside diameter same as nominal pipe - maximum flow
  • Material: Steel
  • Seal: Buna-N
  • Max Working Pressure: 5500 PSI
  • Vacuum Service: 27 in. Hg maximum
  • Temperature Range: -40F to +250F
  • Standard: ANSI/B93.2, 4:1 safety factor
  • Quantity: 1pc
  • Origin: Made in USA

Why this plug

  • Straight-thru, no valve — which means unrestricted full flow with minimal pressure drop, ideal for air, fluid transfer, and vacuum.
  • Same ID as nominal pipe — which means the coupling does not choke your line, maximizing flow and efficiency.
  • Standard industrial interchange — which means it couples with the most widely used industrial coupler design.
  • Steel construction — which means strength and durability for demanding use.
  • Hose stem plug — which means a direct hose connection (requires hose clamp).

Frequently asked questions

What does straight-thru mean?
There is no shut-off valve in either the socket or the plug, so the coupling flows as freely as the pipe — maximum flow, minimal pressure drop. Note: lines do not self-seal on disconnect.

What does this connect to?
Standard industrial interchange — only same-size FST sockets and plugs couple together.

What pressure is it rated for?
Rated to 5500 PSI (steel, 1/4"), per ANSI/B93.2, 4:1 safety factor.

Ideal for high-flow air, fluid transfer, and vacuum lines where shut-off is not needed. Pair this plug with a matching 1/4" FST socket.

Why buy from hpcouplers: Foster quality, responsive US-based support, accurate specs, fast shipping.