Flexfab 7896-150, 1.50" ID 45° Silicone Elbow, Blue Coolant / Charge Air, 6.00" Legs

Turn a tight corner in your coolant or charge-air plumbing with the Flexfab 7896-150 45° silicone elbow. Its low-dilation, 3-ply meta-aramid construction holds shape under boost and heat — a dual-purpose elbow rated for both coolant hose and charge-air-connector duty.

Why this Flexfab 45° silicone elbow

• Dual-purpose design — works as a coolant hose or a charge-air connector, so one part covers two jobs.
• 3-ply meta-aramid, low-dilation — resists ballooning under pressure for a stable, reliable bend.
• −65°F to +500°F range — extreme-duty-cycle tested for hostile engine environments.
• Meets SAE J20 R1 Class A & TMC RP303B Class I Grade II — documented spec-grade performance.
• 1.50" (38mm) ID, 45° bend, 6.00" legs, .140"/.190" wall — sized for a clean clamp seal on both legs.

Pair with appropriate clamps on each leg for a secure, leak-free connection. Leg length is measured from the start of the bend radius to the end of the hose.

Backed by hpcouplers’ fast shipping and easy returns — order with confidence from a trusted industrial hose and coupler supplier.

• FlexFab Series: 7896
• Part Number: 7896-150
• Bend Angle: 45°
• Inside Diameter (ID): 1.50" (38mm)
• Leg Length: 6.00"
• Wall Thickness: .140" / .190"
• SAE J20 R1 Class A: Yes
• TMC RP303B Class I Grade II: Yes
• Extreme temp range: -65F to +500F
• Construction: Blue silicone hose with 3-ply meta-aramid reinforcement (low dilation)