Skip to content
Foster SHB7SS, SHB Band Clamp, Stainless Steel

Foster BLFS216VP, 1/4" Jiffy-Tite Mold Coolant Coupler x 90° 3/8" Hose Barb, FJT Series, One-Way Valved, Push-On, Ball Lock, Brass

by Foster
€16,95 - €16,95
€16,95
€16,95 - €16,95
€16,95

Fast coolant-line connections that slash mold-change downtime. The Foster BLFS216VP is a brass 1/4" coupler from the FJT Series — the Jiffy-Tite mold-coolant interchange (crosses Jiffy-Matic and Parker Moldmate) used throughout plastic injection molding and die casting. This is the one-way valved version, with a 90° 3/8" hose barb. Rated to 200 PSIG, -90F to +440F.

Specifications

  • Brand: Foster
  • Series: FJT (Injection Mold / Die Coolant)
  • Part Number: BLFS216VP
  • Interchange: 1/4" Jiffy-Tite / Jiffy-Matic / Parker Moldmate
  • Body: 1/4" Coupler (female half)
  • Hose Barb ID: 3/8"
  • Stem Angle: 90°
  • Connection: Push-On hose barb (no clamp needed)
  • Valving: One-Way Valved
  • Material: Brass
  • Locking: Ball Lock
  • Max Working Pressure: 200 PSIG
  • Temperature Range: -90F to +440F (silicone seal)
  • Seal: Silicone
  • Quantity: 1pc
  • Origin: Made in USA

Why this coupler

  • Jiffy-Tite mold-coolant interchange — which means it connects with the widely used Jiffy-Tite / Jiffy-Matic / Parker Moldmate mold coolant system.
  • Fast mold-change connect — which means coolant lines couple in seconds, cutting machine downtime during changeovers.
  • Wide -90F to +440F silicone seal — which means it handles hot oil and water/glycol heat-transfer systems.
  • One-way valved — which means the coupler shuts off automatically on disconnect (use with valved nipples).
  • Push-On barb — which means no hose clamp required with Push-On hose.
  • Ball lock — which means a secure connection that resists accidental disconnect.
  • 90° stem — which means clean hose routing in tight mold setups.

Frequently asked questions

Are these Jiffy-Tite couplers?
Yes — the FJT Series is the Jiffy-Tite mold-coolant interchange and also crosses Jiffy-Matic and Parker Moldmate. Foster calls it the Injection Mold / Die Coolant Series.

What is it used for?
Connecting coolant (water, water/glycol, or oil) lines to plastic injection molds and die-casting dies, for fast mold changes.

What are the ratings?
200 PSIG max working pressure, -90F to +440F with the standard silicone seal.

Valved or non-valved?
This is the one-way valved coupler. Valved couplers must be used with valved nipples; non-valved give maximum flow.

Built for the plastics and die-casting industries. Pair this coupler with the matching FJT nipple and coolant hose.

Why buy from hpcouplers: Foster quality, responsive US-based support, accurate specs, fast shipping.